How to maintain Kumiko
How to maintain Kumiko products after your purchase
Kumiko Ramma is rarely stained since it is normally placed out of reach of people, but dust can collect between frames and lattices and within the lattice work.
It is recommended that the cleaning instructions given below are followed in order to protect the delicate parts of Kumiko.
We recommend the use of an air blower as the simplest and quickest method of removing dust.
Ways of removing dust:
●Air duster(Spray type)
Available at PC shops or stationaries. Price starts from 600 yen per bottle (300ml).
●Blower
A small machine that can be found at gardening centers or DIY shops, used by gardeners to blow away autumn leaves. It may be possible to rent by the day, or to purchase online at a lower cost.
●Compressor (air gun type)
As used in corporate buildings. If your company possesses a compressor, you can use it to effectively remove dust.
●Blower function on vacuum cleaner
Recent vacuum cleaners have a blower function that can be used to clean dust from Kumiko.
In order to avoid damaging the Kumiko, it is strongly recommended that suction NOT be used to remove dust.
How to clean the wood surfaces
For products with no color
If the surface is stained due to handling, wipe it with a wet cloth. However, Kumiko products usually need no cleaning other than dust removal. Wood cleaner, available from DIY shops, can be used instead of a wet cloth.
Or stain remover, available from DIY shops, can be used. There are several ways of cleaning stains. Removing stubborn stains with a plane or sandpaper would be recommended only if the wood has not been exposed to sun for a long time. Scraping the surface is the least desirable solution for stain removal as the cleaned area will differ in color.
For products with minor damage
If the wood has been slightly dented, it normally comes back after applying water to the area, thanks to the capacity of natural wood to restore itself. However, this is not the case if the damage is deep.
